Master Control - Berker

Icon for 3
'Universal / Capacitive'
Icon for 4
'Universal / Inductive'
Value alignment Left-align
Centred
Right-align
User-defined
Order-No. 7574 00 1X
Software "...590101"
Parameters
No presetting If the a dimmer actuator is working according
to the universal principle and the
load type is fed back as capacitive, then
the display element will display the icon
defined here.
This parameter is only visible with
"Status display = as icon".
No presetting If the a dimmer actuator is working according
to the universal principle and the
load type is fed back as inductive, then
the display element will display the icon
defined here.
This parameter is only visible with
"Status display = as icon".
This parameter defines the horizontal arrangement
of the status display within
the display element. In the "Userdefined"
setting, an additional parameter
is displayed for precise positioning.
X position of the value 1 The alignment of the status display within
a display element is specified here.
The settable value depends on the width
of the display element.
h Page -> [Display element designation] - [Display element function] -> [Button designation] -
[Button function] -> General
Designation [Button] A button designation can be entered
here, which is only displayed in the tree
structure within the ETS plug-in.
Text for line 1 [Back] Two lines of text are available to display
the button function, which are positioned
horizontally in the function button shown
on the screen. The first line of the display
text is specified here.
Function buttons assigned to a display
element only appear on the screen if
two-click operation was configured.
X position for line 1 0 This parameter specifies the X position
of the first line of the button text.
Text for line 2 No presetting Two lines of text are available to display
the button function, which are positioned
horizontally in the function button shown
Page 172 of 222