Master Control - Berker

Enter 'Departing' Yes
No
Enter 'Acknowledged' Yes
No
h Timers -> [Timer designation]
Order-No. 7574 00 1X
in message list = Yes".
If this parameter is set to "Yes", then a
departing fault message (fault message
deactivated) is logged in the panel's
message list together with the time.
This parameter is only visible on "Entry
in message list = Yes".
If this parameter is set to "Yes", then the
acknowledgement of a fault message is
logged in the panel's message list together
with the time.
This parameter is only visible on "Entry
in message list = Yes".
Designation [Filtering/Time] Predefined designation, which only appears
in the parameter node name and
which can be modified as necessary.
Input -> Output On - > --- / Off -> ---
On -> On / Off -> ---
On - > --- / Off -> Off
On -> On / Off -> Off
On – / Off -> Off -> ---
On -> --- Off -> On
On -> Off / Off -> On
On - > Toggle / Off -> ---
On - > --- / Off -> Toggle
On - > Toggle / Off ->
Toggle
Time function, output No delay
Switch-on delay
Switch-off delay
ON delay and OFF delay
Software "...590101"
Parameters
The timer can output a value settable
here, depending on the value of the input
object (filter function).
The input telegram can be forwarded to
the output of the filtering/timer after a
delay (time delay function). It is possible
to specify here whether the time delay is
active and, if so, which switching state
(ON and / or OFF) should be delayed.
With "ON delay and OFF delay", the
delay times can be set individually.
Switch-on delay basis This parameter defines the time base for
the switch-on delay.
Page 189 of 222