Master Control - Berker

4.2.3 Object table
Number of communication objects: max. 2,000
Generated dynamically
Number of addresses (max): 3,000
Number of assignments (max): 3,000
Dynamic table management: No
Maximum table length: ----
The communication objects are generated dynamically by the ETS plugin according to
requirements. Within the ETS (Project view) all the objects described below are displayed
as collective objects with allocated group addresses, depending on the data format.
Group addresses may only be linked to communication objects in the plug-in.
Objects for general functions
Function: Acoustic signal
Object
h
Function
Sound output
Order-No. 7574 00 1X
Name
Acoustic signal
Type
1 bit
DP type
1,001
Description 1 bit object, using which the piezo buzzer can be switched on and off. If this
object is used, all the automatic signal tones (e.g. for fault messages) are suppressed..
0 = Buzzer off / 1 = Buzzer on
Function: Automatic time setting
Object
h
Function
Date / Time
Name
Automatic time
setting
Type
1 bit
DP type
1,001
Description 1 bit object, via which the summer / winter time setting can be carried via the
bus.
0 = Winter time / 1 = Summer time
Function: Display lighting
Object
h
Function
LCD lighting
Name
Lighting object
Type
1 bit
Software "...590101"
DP type
1,001
Object table
Description 1 bit object, using which the display background lighting can be switched off
and on. The telegram polarity can be configured.
After a time settable in the plug in has elapsed, the lighting automatically
switches back to the basic level of brightness.
Flag
C, S
Flag
C, S
Flag
C, S
Page 19 of 222