Master Control - Berker

The parameters of the display elements make a distinction between two possible types of operation...
- Single click operation:
Tapping the display element (33) automatically executes the function of function button 1.
For this, it is not necessary to have the four function buttons (34) of this display element
visible at the bottom edge of the screen. The parameter "Hide function keys" in the parameter
group of the display element specifies whether the appropriate buttons are visible for
a selected element or not. If all the function buttons are visible, then additional buttons of
the element can be operated after clicking the display element and automatic execution of
the function of button 1.
If the scroll bar is used, in order to switch between the different display elements using the
single arrows, the display elements are simply selected without direct execution of the function.
- Two click operation:
Tapping the display element (33) or selecting the scroll bar makes the four function buttons
(34) of the display element visible without directly executing a function. Only when one of
the function buttons is actuated is the stored function executed.
The individual function buttons can be configured independently with the following functions.
Switching:
On pressing and / or releasing the button, the panel can transmit no telegram, switch on, switch
off or switch.
The telegram is transmitted via a separate button object.
If the display element is configured for the display function "Switching", then the function buttons
can be also be configured for the function "Switching function of the display element". In this
case, the function button affects the communication object of the display element and not a separate
object.
Blind:
The parameter "Blind function" determines the direction (Up, Down, Toggle) in which the drive
to be controlled should travel. If the setting is "Toggle", the direction is changed after long actuation.
In addition, the parameters can be adjusted to make a distinction between lamella adjustment
(brief actuation) and movement (long actuation).
The telegram is transmitted via two separate button objects (long-time operation and short-time
operation).
If the display element is configured for the display function "Blind", then the function buttons can
be also be configured for the function "Blind function of the display element". In this case, the
function button affects the communication objects of the display element and not separate elements.
In addition, in this case, the time settings of the display element are used.
Dimming:
The parameter "Dimming button function" determines which switching or dimming commands
the panel sends to the bus when the button is pressed for a long or short time. In addition, the
parameters can be adjusted to make a distinction between switching (brief actuation) and dimming
(long actuation).
The telegram is transmitted via two separate button objects (switching and dimming).
Alternatively, a 1 byte object with a constant brightness value can be used (parameter "Dimming
button function" = "Brightness value"). In this case, the value to be transmitted on pressing the
button can be configured.
The telegram is then transmitted via a separate button object.
If the display element is configured for the display function "Dimming", then the function buttons
can be also be configured for the function "Dimming function of the display element". In this
case, the function button affects the communication objects of the display element and not separate
elements. In addition, in this case, the time settings of the display element are used.
Value:
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 61 of 222