Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
The ABLP_ack packet shall include the same TMI and sequence number as the transmitted ABLP_inf packet. The
sequence number shall be increased with every transmitted ABLP_inf packet. The reception of the ABLP_ack
implies that the receiver has accepted the new tonemap configuration.
9.1.2.3 ABLP_inf packet format
Figure 69: Example of successful tonemap negotiation
ABLP_inf packets shall be sent in HURTO mapping mode. The use of a different mapping could result in the
impossibility to negotiate new tonemaps if current tonemap configuration is inadequate.
ABLP_inf packets use the CCP with Type0 0x01 and Type1 0x01. The packet format can be seen in Figure 70.
Figure 70: ABLP_inf packet
ABLP_inf packets use 0x01139D000000 multicast address as destination MAC address.
Submission page 193 UPA-OPERA