Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
• OVLAN_TAGGED_ONLY_IFACE_PL_X = [yes/no]
Being X = 0 to 127 (BPL port)
o Parameter: ‘yes’ (to accept only tagged packets at other interfaces) or ‘no’ (to accept any packet at
other interfaces)
o SNMP: none
o Mandatory: no
If this parameter is set to ‘yes’, the modem will drop packets without a OVLAN tag entering BPL ports (PL_X).
• OVLAN_OUTFORMAT_TAG_IFACE_ROOT = [yes/no]
o Parameter: ‘yes’ (to introduce a tag in output packets at root interface) or ‘no’ (to not introduce a
tag in output packets at root interface)
o SNMP: none
o Mandatory: no
If this parameter is set, the modem will introduce a OVLAN tag when sending packets to the root interface
(IFACE_ROOT).
• OVLAN_OUTFORMAT_TAG_IFACE_PL_X = [yes/no]
Being X = 0 to 127 (BPL port)
o Parameter: ‘yes’ (to introduce a tag in output packets at BPL ports) or ‘no’ (to not introduce a tag
in output packets at BPL ports)
o SNMP: none
o Mandatory: no
If this parameter is set, the modem will introduce a OVLAN tag when sending packets to BPL ports (PL_X).
• OVLAN_POVID_PL_X = [2-4095]
Being X = 0 to 127 (BPL port)
o Parameter: Number from 2 to 4095
o SNMP: none
o Mandatory: no
Submission page 338 UPA-OPERA