Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
• GENERAL_IP_NETMASK =
o Parameter: The valid format is the dotted decimal notation (four decimal numbers separated by
dots).
• GENERAL_IP_GATEWAY =
o Parameter: The valid format is the dotted decimal notation (four decimal numbers separated by
dots).
• GENERAL_IP_USE_DHCP = [YES | NO]
o Parameter: If Yes DHCP is used, if NO DHCP is not used.
12.3.3.2 AGC (Automatic Gain Control) Parameters
• AGC_TX_GAIN = [0 | 1]
o Parameter: Selecting 1, the default value, 12 dB are added to the reference gain. In case of 0 value,
no extra gain is added (0 dB).
• AGC_RX_ENABLE = [0 | 1]
o Parameter: Enables (1) or disables (0) the hardware AGC.
• AGC_RX_FIX_GAIN = [0 … 7]
o Parameter: Eight values, from 0 to 7, are possible. Those values represent gains from 0 to 42 dB,
respectively, added to the reference gain in steps of 6 dB.
• AGC_MAX_RX_GAIN = [0 … 7]
o Parameter: Eight values, from 0 to 7, are possible. Those values represent gains from 0 to 42 dB,
respectively, added to the reference gain in steps of 6 dB. The default value is 7 (42 dB).
• AGC_MIN_RX_GAIN = [0 … 7]
o Parameter: Eight values, from 0 to 7, are possible. Those values represent gains from 0 to 42 dB,
respectively, added to the reference gain in steps of 6 dB. The default value is 7 (42 dB).
12.3.3.3 RADIUS Parameters
• RADIUS_SERVER_IP =
o Parameter: The valid format is the dotted decimal notation (four decimal numbers separated by
dots).
• RADIUS_SERVER_PORT = ddddd
o Parameter: Port number
Submission page 379 UPA-OPERA