Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
NACK_SECTION_i 1 - Bit 0: if set to 1 means that CHIP
section not correctly decoded.
Table 33 NACK_CAP_ANN message fields
Aggregated messages
Bit 1: if set to 1 means that
REFERENCE DESIGN section not
correctly decoded.
Bit 2: if set to 1 means that
FIRMWARE section not correctly
decoded.
In order to make the protocol more efficient, a message aggregation can be performed. It shall consist on changing
the MSG_TYPE field code by the aggregation of up to three different messages types, as shown in Table 38. The
order of the submessages in the final structure shall follow the scheme presented in the following figure, where
some examples are proposed:
Submission page 230 UPA-OPERA