Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
• VLAN_VOIP_TAG = [2-4093] | %
o Parameter: Number from 2 to 4093 or ‘%Parameter_name‘ (parametric value preceded by a %)
o SNMP: no
o Mandatory: no
This parameter configures the VLAN_ID (VID) for the VoIP packets (packets coming from the external
interfaces). The value set can be a value (from 2 to 4093) or a parametric value. In this last case, the
adequate value will be taken from the translation table.
• VLAN_VOIP_PRIO = [0-7]
o Parameter: Number from 0 to 7
o SNMP: no
o Mandatory: no
This autoconfiguration parameter sets the VLAN priority for the VoIP packets.
• VLAN_VSIG_PRIO = [0-7]
o Parameter: Number from 0 to 7
o SNMP: no
o Mandatory: no
It configures the VLAN priority for the VoIP signalling packets.
• VLAN_TRUNK.i = [2-4093]
o Parameter: Number from 2 to 4093)
o SNMP: no
o Mandatory: yes
This parameter is usable at LV and MV nodes. It configures a list of VLAN trunks different from the ones
inside the translation table that must be allowed in the node interfaces. It is necessary to configure these
trunks for private VLANs between EUs in all intermediary equipment.
• VLAN_RETAG_EXTA_SRC = [0 | 2-4095]
o Parameter: ‘0’ (in order to disable retagging in interface) number from 2 to 4095.
o SNMP: no
Submission page 329 UPA-OPERA