Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
3.15.7.2 Semantics of the service primitive
PHY-MNT-BPC-SET.req (bpc_type, port, tonemap)
• bpc_type: tx, rx (transmission, reception)
• port: transmission or reception port
• tonemap: updated tonemap to be used
3.15.7.3 When generated
The primitive is generated when the transmission/reception tonemap table with a node must be changed according
to the ABLP protocol
3.15.7.4 Effect of receipt
The tonemap used by the Physiscal layer to transmit/receive to/from a remote node is changed.
3.15.8 PHY-MNT-BPC-SET.cnf
3.15.8.1 Function
This primitive informs the Management layer that the tonemap has been updated.
3.15.8.2 Semantics of the service primitive
PHY-MNT-BPC-SET.cnf (bpc_type, port, tonemap)
• bpc_type: tx, rx (transmission, reception)
• port: transmission or reception port
• tonemap: updated tonemap
3.15.8.3 When generated
The primitive is generated by the Physical layer to confirm the Management layer that the tonemap has been
updated.
3.15.8.4 Effect of receipt
Management layer can use the updated tonemap for throughput and class of service calculations.
Submission page 74 UPA-OPERA