Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Mandatory: no
Custom i-criterion j-class 8-byte pattern (i = 1, 2; j = 1 … 8).
• COS_CUSTOM_CRITERION_CLASSES_PRIO.i.j = [0 … 7]
o Parameter: Values from 0 to 7 are allowed.
o SNMP: no
o Mandatory: no
Priority assigned the packets that match the custom i-criterion j-class priority (i = 1, 2; j = 1 … 8).
• COS_CRITERION.k = [8021P | TOS | CUSTOM1 | CUSTOM2]
o Parameter: There are two predefined criteria (8021P, based on IEEE 802.1p VLAN tag priority
field, and TOS, based on IP type of service), and two custom criteria (CUSTOM1 and CUSTOM2),
defined with the parameters above (COS_CUSTOM_CRITERION_xxx).
o SNMP: no
o Mandatory: yes
k-criterion definition (k = 1, 2). Assigns up to 2 criteria to classify traffic. There are two predefined criteria
(one based on IEEE 802.1p VLAN tag priority field, and another based on IP type of service), and two
custom criteria, defined with the parameters above (COS_CUSTOM_CRITERION_xxx).
• COS_DEFAULT_PRIO = [0 … 7]
o Parameter: Values from 0 to 7 are allowed.
o SNMP: no
o Mandatory: yes
Configures the CoS default priority, i.e. the priority assigned to packets that do not match any criterion.
11.5 QUALITY OF SERVICE (QOS) PARAMETERS
• QOS_ENABLE = [YES | NO]
o Parameter: Enables (YES) or disables (NO) the quality of service in the node.
o SNMP: no
o Mandatory: yes
Submission page 302 UPA-OPERA