Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Parameter: ‘yes’ (to enable checking of best master periodically after connecting with one) or ‘no’
(to disable the checking of better masters after connecting to one).
• AP_CHECK_BEST_MASTER_PERIOD =
o Parameter: Number of minutes
• AP_CURRENT_MASTER_MIN_BPS =
o Parameter: Number of bits per symbol
• AP_NEW_MASTER_MIN_BPS =
o Parameter: Number of bits per symbol
• ACCESSP_AUTHLIST_MAC.i = 0xXXXXXXXXXXXX
o Parameter: ‘0xXXXXXXXXXXXX’ (MAC address authorized to connect)
• ACCESSP_AUTHLIST_PROFILE.i = [1-16]
o Parameter: Number of the profile related to a MAC authorized
• ACCESSP_AUTHLIST_FWTYPE.i = [MV|LV|EU]
o Parameter: ‘MV’ (medium voltage) or ‘LV’ (low voltage) or ‘EU’ (End User)
12.3.3.11 STP Parameters
• STP_PRIO = [0 … 65535]
o Parameter: Valid values range from 0 to 65535.
• STP_PORT.i = [EXTA | EXTB | BPL]
o Parameter: Three possible values: EXTA, EXTB and BPL (i = 1,2 or 3).
• STP_PORT_PRIO.i = [0 … 255]
o Parameter: Valid values range from 0 to 255 (i = 1,2 or 3).
• STP_PORT_COST.i = [0 … 4294967295]
o Parameter: Valid values range from 0 to 4294967295 (i = 1,2 or 3).
• STP_HELLO_TIME = [10 … 40]
o Parameter: Valid values range from 10 to 40.
• STP_MAX_AGE = [10 … 40]
o Parameter: Valid values range from 10 to 40.
Submission page 385 UPA-OPERA