Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Mandatory: no
It this parameter is set, the modem will introduce a VLAN tag when sending packets to BPL port (PL_X).
• VLAN_PVID_PL_X = [2-4095]
Being X = 0 to 127 (BPL port)
o Parameter: Number from 2 to 4095
o SNMP: none
o Mandatory: no
This autoconfiguration parameter specifies the 802.1Q VLAN tag for tagging untagged packets from the BPL port
(PL_X).
• VLAN_PVID_EXTA = [2-4095]
o Parameter: Number from 2 to 4095
o SNMP: none
o Mandatory: no
This autoconfiguration parameter specifies the 802.1Q VLAN tag for tagging untagged packets from the external
interface A (EXTA).
• VLAN_PVID_EXTB = [2-4095]
o Parameter: Number from 2 to 4095
o SNMP: none
o Mandatory: no
This autoconfiguration parameter specifies the 802.1Q VLAN tag for tagging untagged packets from the external
interface B (EXTB).
• VLAN_PVID_FW = [2-4095]
o Parameter: Number from 2 to 4095
o SNMP: none
o Mandatory: no
This autoconfiguration parameter specifies the 802.1Q VLAN tag for tagging untagged packets from the firmware
interface (FW).
Submission page 334 UPA-OPERA