03.11.2012 Views

Medium Access Control (MAC) and Physical Layer (PHY) - CISE

Medium Access Control (MAC) and Physical Layer (PHY) - CISE

Medium Access Control (MAC) and Physical Layer (PHY) - CISE

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

4-June-07 P1901_PRO_016_r0<br />

9.1.2.4 ABLP_ack packet<br />

ABLP_ack packets shall be sent in HURTO mapping mode. ABLP_ack packets use the CCP with Type0 0x01 <strong>and</strong><br />

Type1 0x04. The packet format can be seen in Figure 75¡Error! No se encuentra el origen de la referencia..<br />

Figure 73: ABLP_ack packet<br />

ABLP_ack packets use 0x01139D000000 multicast address as destination <strong>MAC</strong> address.<br />

Source <strong>MAC</strong> is set to the ABLP_ack packet transmitter <strong>MAC</strong> address.<br />

The ABLP_ack data format is shown in Figure 74¡Error! No se encuentra el origen de la referencia..<br />

Description:<br />

Figure 74: ABLP_ack Data<br />

a) Remote Port: Remote Port assigned by the ABLP_ack packet transmitter to the link with the ABLP_ack<br />

packet destination node. May be the First or the Second Remote Port.<br />

b) TMI: acknowledged Tonemap ID.<br />

Submission page 196 UPA-OPERA

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!