Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Parameter: Number from 2 to 4093 or ‘%Parameter_name’ (parametric value preceded by a %)
• PROFILE_VOIP_VLAN.i = [2-4093] | %
o Parameter: Number from 2 to 4093 or ‘%Parameter_name’ (parametric value preceded by a %)
• PROFILE_VLAN_ADD_TAG.i.j = [2-4093] or parametric
o Parameter: Number from 2 to 4093 or ‘%Parameter_name’ (parametric value preceded by a %)
• PROFILE_VLAN_IS_ALLOWED_IFACE_USER.i = [yes/no]
o Parameter: ‘yes’ (to set the list as allowed) or ‘no’ (to set the list as forbidden)
• PROFILE_VLAN_TAGGED_ONLY_IFACE_USER.i = [yes/no]
o Parameter: ‘yes’ (to drop input packets without VLAN tag) or ‘no’ (to not drop input packets
without VLAN tag)
• PROFILE_VLAN_OUTFORMAT_TAG_IFACE_USER.i = [yes/no]
o Parameter: ‘yes’ (to send packets with VLAN tag) or ‘no’ (to not send packets with VLAN tag)
• PROFILE_OVLAN_ADD_TAG.i.j = [2-4094] or parametric
o Parameter: Number from 2 to 4094 or ‘%Parameter_name’ (parametric value preceded by a %)
• PROFILE_OVLAN_IS_ALLOWED_IFACE_USER.i = [yes/no]
o Parameter: ‘yes’ (to mark the list as allowed) or ‘no’ (to mark the list as forbidden)
• PROFILE_OVLAN_TAGGED_ONLY_IFACE_USER.i = [yes/no]
o Parameter: ‘yes’ (to drop input packets without OVLAN tag) or ‘no’ (to not drop input packets
without OVLAN tag)
• PROFILE_OVLAN_OUTFORMAT_TAG_IFACE_USER.i = [yes/no]
o Parameter: ‘yes’ (to send packets with OVLAN tag) or ‘no’ (to not send packets with OVLAN
tag)
• PROFILE_UPBWLIMIT.i = [YES|NO]
o Parameter: ‘yes’ (to limit the upstream) or ‘no’ (to not limit the upstream)
• PROFILE_DWBWLIMIT.i = [YES|NO]
o Parameter: ‘yes’ (to limit the downstream) or ‘no’ (to not limit the downstream)
12.3.3.7 Translation Table Parameters
• TRANSLATION_MNMT_VLAN = [2-4093]
Submission page 382 UPA-OPERA