Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Parameter: The value must be specified with 12 hexadecimal digits.
o SNMP: no
o Mandatory: no
Configures i-MAC address of the allowed MAC list for MAC ingress filtering when fixed MAC ingressfiltering
mode is selected (i = 1 … 4).
11.9 NTP PARAMETERS
For complete information about NTP (Network Time Protocol) please refer to RFC 958.
• NTP_ENABLE = [ENABLED | DISABLED]
o Parameter: Enables (ENABLED) or disables (DISABLED) the NTP feature.
o SNMP: no
o Mandatory: no
Enables or disables the NTP feature.
• NTP_SERVER_IP =
o Parameter: The valid format is the dotted decimal notation (four decimal numbers separated by
dots).
o SNMP: no
o Mandatory: no
Configures the NTP server IP address.
• NTP_TIMEZONE = [-12 … 12] * 60
o Parameter: This value must be specified in minutes (in 60-minute steps) relative to Universal
Time (UT). A value of 0 corresponds to UT.
o SNMP: no
o Mandatory: no
Configures the timezone for the NTP clock server. This value is relative to Universal Time (UT), also known as
Greenwich Mean Time (GMT).
• NTP_DST = [YES | NO]
Submission page 311 UPA-OPERA