Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
• VLAN_DEFAULT_PRIO_PL_X = [0-7]
Being X = 0 to 127 (BPL port)
o Parameter: Number from 0 to 7
o SNMP: none
o Mandatory: no
This parameter configures the 802.1p priority for tagging untagged packets from the BPL interface (PL_X).
• VLAN_DEFAULT_PRIO_EXTA = [0-7]
o Parameter: Number from 0 to 7
o SNMP: none
This parameter configures the 802.1p priority for tagging untagged packets from external (Ethernet) interface A
(EXTA).
• VLAN_DEFAULT_PRIO_EXTB = [0-7]
o Parameter: Number from 0 to 7
o SNMP: none
o Mandatory: no
This parameter configures the 802.1p priority for tagging untagged packets from external (Ethernet)
interface B (EXTB).
• VLAN_DEFAULT_PRIO_FW = [0-7]
o Parameter: Number from 0 to 7
o SNMP: none
o Mandatory: no
This parameter configures the 802.1p priority for tagging untagged packets from firmware interface (FW).
• VLAN_IS_ALLOWED_IFACE_ROOT = [yes/no]
o Parameter: ‘yes’ (to set list as allowed) or ‘no’ (to set list as forbidden)
o SNMP: none
o Mandatory: no
Submission page 335 UPA-OPERA