Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Parameter: Enables (1) or disables (0) the hardware AGC.
o SNMP: plBasicRXAGCEnable
o Mandatory: no
Enables or disables the reception HW AGC. It is enabled by default.
• AGC_RX_FIX_GAIN = [0 … 7]
o Parameter: Eight values, from 0 to 7, are possible. Those values represent gains from 0 to 42 dB,
respectively, added to the reference gain in steps of 6 dB.
o SNMP: plBasicRXAGCGain
o Mandatory: no
It sets a fixed value for the reception gain. This value is only taken into account if the HW AGC is disabled.
Eight gain values, from 0 to 42 dB, can be added to the reference gain.
• AGC_MAX_RX_GAIN = [0 … 7]
o Parameter: Eight values, from 0 to 7, are possible. Those values represent gains from 0 to 42 dB,
respectively, added to the reference gain in steps of 6 dB. The default value is 7 (42 dB).
o SNMP: no
o Mandatory: no
Configures the maximum reception gain for the HW AGC. Eight gain values, from 0 to 42 dB, can be
added to the reference gain. The default value is 42 dB.
• AGC_MIN_RX_GAIN = [0 … 7]
o Parameter: Eight values, from 0 to 7, are possible. Those values represent gains from 0 to 42 dB,
respectively, added to the reference gain in steps of 6 dB. The default value is 7 (42 dB).
o SNMP: no
o Mandatory: no
Configures the minimum reception gain for the HW AGC. Eight gain values, from 0 to 42 dB, can be added
to the reference gain. The default value is 0 dB.
11.3 RADIUS PARAMETERS
• RADIUS_SERVER_IP =
Submission page 299 UPA-OPERA