Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o plSysConfDownload: This OID accepts a string in this format:
where:
“PROT IP CONFIG_FILE USER PASSWD“
PROT Value of 0 for downloading the configuration file by TFTP, or 1 to download it by FTP.
IP IP address of the TFTP or FTP server.
CONFIG_FILE Name of the file to be downloaded.
USER User login for FTP, not necessary if TFTP is being used.
PASSWD User password for FTP, not necessary if TFTP is being used.
Table 64 Download configuration file parameters
This way, the system performs a download of a new configuration file from a FTP or TFTP server.
The configuration file name string size can be up to 60 characters long.
o plSysUpgradeStatus: This OID is read-only and shows an integer number, which is a special code
for showing the current status of the upgrade in progress. The codes for this OID are:
0 Last upgrade was performed correctly.
-1 No FLASH upgrade has been performed since the last boot.
-2 Last upgrade failed checking CRC.
-3 Last upgrade failed due to src was incorrect.
-4 Last upgrade failed due to destination (FLASH sector) was incorrect.
-5 Last upgrade failed due to file was for an incorrect HW product.
-6 Last upgrade failed due to file was for an incorrect HW Revision.
-7 Last upgrade failed due to file was for an incorrect ASIC.
Submission page 349 UPA-OPERA