Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o Mandatory: no
This parameter is a list of the MAC address of the modems that will be allowed to connect through this
master. The length of the list is 128 (i=1…128).
• ACCESSP_AUTHLIST_PROFILE.i = [1-16]
o Parameter: Number of the profile related to a MAC authorized)
o SNMP: no
o Mandatory: no
If a slave is accepted via the authorization list it will use the parameters of one profile. This
autoconfiguration parameter indicates which profile will be associated with each slave. The length of the list
is 128 (i=1…128).
• ACCESSP_AUTHLIST_FWTYPE.i = [MV|LV|EU]
o Parameter: ‘MV’ (medium voltage) or ‘LV’ (low voltage) or ‘EU’ (End User)
o SNMP: no
o Mandatory: no
If a slave is accepted via the authorization list it will have a firmware type This autoconfiguration parameter
indicates which firmware type will be associated with each slave. The length of the list is 128 (i=1…128).
12 CONFIGURATION
12.1 MIB
12.1.1 SNMP Management
SNMP (Simple Network Management Protocol) refers to a group of specifications for the management of
communication networks: the protocol, the data base definition and the modules. For more information, consult the
SNMP standards RFC 1155 (Structure and Identification of Management Information for TCP/IP-based Internets),
RFC 1157 (Simple Network Management Protocol), RFC 1213, Management Information Base).
Each resource to be managed in a device is represented by an object. The MIB is a structured collection of these
objects. For SNMP, the MIB is a database structure, or a database definition. Each system in a network to be
managed must maintain a MIB that reflects the status of the managed resources in that system.
Submission page 344 UPA-OPERA