Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
o plStatisticsBPLInputPktsRcvComplete: Number of packets received complete by the BPL
physical interface.
o plStatisticsBPLInputPktsRcvIncomplete: Number of packets received incomplete by the BPL
physical interface.
o plStatisticsBPLOutputWords: Number of words transmitted through the BPL physical interface.
o plStatisticsBPLOutputPkts: Number of packets transmitted through the BPL physical interface.
plTraps
• plTrapsPhyTable
o plTrapsPhyCard: Card index.
o plTrapsPhyTrapToHURTOEnable: Enables/disables trap generation when entering HURTO
mode.
o plTrapsPhyTrapFromHURTOEnable: Enables/disables trap generation when leaving HURTO
mode.
• plTrapsMACTable
o plTrapsMACCard: Card index.
o plTrapsMACTrapPeerDetectedEnable: Enables/disables trap generation when detecting a peer
modem.
o plTrapsMACTrapPeerDisappearedEnable: Enables/disables trap generation when a peer modem
disappears.
• plTrapsBridgeTable
o plTrapsBridgeCard: Card index.
o plTrapsBridgeTrapNewRootEnable: Enables/disables trap generation when a new root is
assigned. The trap is sent from a node when this node becomes root.
o plTrapsBridgeTopologyChangeEnable: Enables/disables trap generation when network topology
changes.
• plTrapsConfFailTable
o plTrapsConfFailCard: Card Index.
o plTrapsConfDonwloadFailEnable : Enables/disables the trap generation when a configuration file
download fails.
o plTrapsConfUploadFailEnable : Enables/disables the trap generation when a configuration file
upload fails.
plStp
• plStpTable
Submission page 357 UPA-OPERA