Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
This parameter is a list of OVLAN tags for external (Ethernet) interface B. Up to 16 values can be configured.
• OVLAN_IS_ALLOWED_IFACE_PL_X = [yes/no]
Being X = 0 to 127 (BPL port)
o Parameter: ‘yes’ (to set the BPL interface list as allowed) or ‘no’ (to set the BPL interface list as
forbidden)
o SNMP: none
o Mandatory: no
This parameter characterizes the OVLAN list for the BPL Interface X. The list contains allowed tags if configured
as ‘yes’ or forbidden if configured as ‘no’.
• OVLAN_LIST_IFACE_PL_X.i = [2-4095]
o Parameter: Number from 2 to 4095
o SNMP: none
o Mandatory: no
This parameter is a list of OVLAN tags for external BPL interface X.
11.16 ACCESS PROTOCOL PARAMETERS
Parameters for the slave:
• AP_MIN_NUMBER_HOPS = [0|1|…]
o Parameter: Number from 0
o SNMP: no
o Mandatory: no
This parameter configures the main criterion for connecting to a master, the minimum number of hops that
the master has to be separated to the backbone. ‘0’ means that it can connect to the master connected to the
backbone (no hop), ‘1’ means that it can connect to masters with one hop to the backbone (TDrepeaters),
and so on.
• AP_FORBID_MASTER.i = 0xXXXXXXXXXXXX
Submission page 341 UPA-OPERA