Medium Access Control (MAC) and Physical Layer (PHY) - CISE

4-June-07 P1901_PRO_016_r0
plBasic
99 A FLASH upgrade process is in unknown status.
Table 65 Upgrade status code list
o plSysUpdate: This OID accepts a string in this format:
where:
“PROT IP CONFIG_FILE USER PASSWD“
PROT Value of 0 for downloading the firmware by TFTP, or 1 to download it by FTP.
IP IP address of the TFTP or FTP server.
CONFIG_FILE Name of the file to be downloaded.
TYPE Type of file 1:FW imag, 2 Loader image, etc.
USER User login for FTP, not necessary if TFTP is being used.
PASSWD User password for FTP, not necessary if TFTP is being used.
Table 66 Update system parameters
This way, the system performs an update of the firmware, loader or whatever part of the code in a
modem from a TFTP or FTP server. The configuration file name string size can be up to 60
characters long.
o plSysDNSAddress: Holds the DNS IP address.
o plSnmpROComunityName: Holds the community name string.
o plSnmpRWComunityName: Holds the community name string.
o plSnmpTrapDest: Holds the IP address to send the traps to.
• plBasicTable
Submission page 351 UPA-OPERA