03.11.2012 Views

Medium Access Control (MAC) and Physical Layer (PHY) - CISE

Medium Access Control (MAC) and Physical Layer (PHY) - CISE

Medium Access Control (MAC) and Physical Layer (PHY) - CISE

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

4-June-07 P1901_PRO_016_r0<br />

This autoconfiguration parameter specifies the OVLAN tag for tagging untagged packets from the BPL port X<br />

(PL_X).<br />

• OVLAN_POVID_EXTA = [2-4095]<br />

o Parameter: Number from 2 to 4095<br />

o SNMP: none<br />

o M<strong>and</strong>atory: no<br />

This autoconfiguration parameter specifies the OVLAN tag for tagging untagged packets from the external interface<br />

A (EXTA).<br />

• OVLAN_POVID_EXTB = [2-4095]<br />

o Parameter: Number from 2 to 4095<br />

o SNMP: none<br />

o M<strong>and</strong>atory: no<br />

This autoconfiguration parameter specifies the OVLAN tag for tagging untagged packets from the external interface<br />

B (EXTB).<br />

• OVLAN_POVID_FW = [2-4095]<br />

o Parameter: Number from 2 to 4095<br />

o SNMP: none<br />

o M<strong>and</strong>atory: no<br />

This autoconfiguration parameter specifies the OVLAN tag for tagging untagged packets from the firmware<br />

interface (FW).<br />

• OVLAN_IS_ALLOWED_IFACE_ROOT = [yes/no]<br />

o Parameter: ‘yes’ (to set the root interface list as allowed) or ‘no’ (to set the root interface list as<br />

forbidden)<br />

o SNMP: none<br />

o M<strong>and</strong>atory: no<br />

This parameter characterizes the OVLAN list for the root interface. Root interface (IFACE_ROOT) list is allowed<br />

tag if configured as ‘yes’ or forbidden if configured as ‘no’.<br />

• OVLAN_LIST_IFACE_ROOT.i = [2-4095]<br />

Submission page 339 UPA-OPERA

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!