MOSAIQ User's Guide - UCSF Radiation Oncology

CHAPTER 5: MOSAIQ Radiation Oncology Clinical Charting
Figure 19: Capture All Parameters Message Box
When you capture settings from the machine, all values, including console (such as
Energy) and accessory information (such as a Wedge) are captured. MOSAIQ overwrites
the information in the treatment field definition with this new information. If the console
or accessory information captured differs from the treatment field definition in
MOSAIQ, a warning message displays.
5. If you are sure the settings on the linear accelerator are correct, click Yes to capture the
settings.
6. If the Console Rx Warning message box opens, click Yes.
This indicates that one or more parameter settings on the linear accelerator do not match
the treatment field definition as shown in Figure 20. Note that the mismatches are
highlighted in red.
Figure 20: Treatment Field Definition with Highlighted Fields
If you click Yes, the existing parameters are overwritten, including parameter settings
that do not match. If you click No, MOSAIQ does not capture the console parameter
settings, but it does capture other settings, such as the gantry/collimator.
Copyright 2010, Elekta Impac Software 97
LUGMSQ0002/4.0/23-Sep-2010