MOSAIQ User's Guide - UCSF Radiation Oncology

CHAPTER 7: Image Management-ViewStation & Photos and Diagrams
If you wish to annotate or enhance images during your review, refer
to Annotating Images on page 172.
13. In the Review Status section, click the Physician radio button if it is not selected. If you
are a Resident, click Resident.
The Physician’s review status supersedes the Resident’s review
status.
14. If you did not log on with your username and password, click in the drop list below
the Physician and Resident radio buttons, then click your name.
15. If you are requesting changes to the image, click the Rejected radio button.
16. If you are satisfied with the image, click the Approved radio button.
17. If you wish to void an approved or rejected image, click the Void check box.
The Void check box is only enabled for rejected or approved images.
Only Physicians can use this option.
If you reject an image, you must request a change on the Changes
tab in order to void the image.
18. Click another image you wish to review in the image information table in the lower
section of the Image Review window.
19. Repeat steps 5 — 18 until you have reviewed all of the images for the patient.
We recommend that you review and select the review status for all
of the patient images in the image information list of the Image
Review window. Then, click OK once when you have completed your
changes. This enables you to save your review of all the images at
the same time.
20. Click OK, which opens the Review Approval dialog box.
Your username automatically appears in the Name field.
21. Type your password in the Password field, then click OK to save the review statuses and
change requests for all of the images you reviewed.
Copyright 2010, Elekta Impac Software 185
LUGMSQ0002/4.0/23-Sep-2010