MOSAIQ User's Guide - UCSF Radiation Oncology

Setting Up Auto-forwarding for a DICOM Device
1. Open DCM.
For more information, refer to the procedure—Logging on
to the System Preferences —on page 223.
2. Click the Auto Forward tab to open it.
CHAPTER 8: MOSAIQ DICOM
3. At the right side of the Device Name: field, click the Add/Delete button to open the
Add/Delete DICOM Device dialog box.
4. In the Add/Delete text box, type the device name.
As you type in the text box, MOSAIQ makes the Add button available.
5. Click the Add button to put the device name into the Device Name field.
The Device Name field shows the device name.
6. In the Destination AE group, click , adjacent to the Device Name field, then select the
device name.
For example, you can select MOSAIQ Oncology PACS or an external treatment planning
system.
7. Above the Destination AE group, click the Enable Auto Forward check box to start the
auto-forwarding setup for the selected device name.
The device name is set, but the DICOM device is not (yet) fully set up for autoforwarding.
The AE Title, Host Name, and Port Number fields are available. The Auto Forward
IODs dialog box is available at this time.
Copyright 2010, Elekta Impac Software 225
LUGMSQ0002/4.0/23-Sep-2010