23.07.2013 Views

MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User's Guide - UCSF Radiation Oncology

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>MOSAIQ</strong> User’s <strong>Guide</strong><br />

Changing Image Color<br />

1. In the toolbox, click to change the image tint to green.<br />

2. Click to restore the image to grayscale.<br />

Inverting the Image Contrast Scale<br />

1. Click to reverse the image intensity map, basically reversing the colors.<br />

Reversing the image intensity map changes the image from positive<br />

to negative and vice versa, much like looking at a photograph and<br />

then looking at its negative.<br />

2. Click to restore image intensity map to its original configuration.<br />

Using the Window and Level Tool<br />

You can also manually change the contrast (window) and brightness (level) of an image using<br />

the Window and Level tool. Changes to image window and level do not change the image<br />

pixel data, just how the data appears.<br />

1. Position your mouse pointer over the red bar on the left to change the mouse pointer to<br />

.<br />

2. Click and drag the red bar slowly all the way to the left to lengthen the image contrast,<br />

adding darker shades of grey, but keeping the brightest pixels constant.<br />

3. Click and drag the red bar on the right side of the tool slowly to the far right to lengthen<br />

the image contrast again, adding brighter shades of grey.<br />

4. Click and drag each of the red bars back to their original position to shorten the<br />

contrast, showing fewer shades of grey.<br />

5. Click and drag the yellow bar slowly all the way to the right to change the window<br />

center, increasing the brightness.<br />

6. Click and drag the yellow bar slowly all the way to the left to change the window center,<br />

decreasing the brightness.<br />

7. Experiment with the brightness and contrast controls to obtain your desired contrast or<br />

detail.<br />

Using Filters<br />

1. Click adjacent to the Filter field.<br />

2. Click Sharpen to apply the sharpen filter, defining the edges of the image.<br />

3. Click adjacent to the Filter field, then click Reduce Noise to remove noise in the<br />

image.<br />

4. Click adjacent to the Filter field, then click AHE to apply the Adaptive Histogram<br />

Equalization filter.<br />

170 Copyright 2010, Elekta Impac Software<br />

LUGMSQ0002/4.0/23-Sep-2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!