MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User’s Guide
Composite Record Treatment Dialog Box
The Composite Record Treatment dialog box is the Record Treatment dialog box for AFS,
CFS, and the 4DITC interface. As with other interfaces, you can review multiple beam entries
that were delivered for one or more fields including all portal images and setup field images
to verify that the treatment information is correct.
Manually Recording a Treatment
SEQUENCER lets you manually record treatments. You can also manually record Treatment
Calendar sessions.
1. In the Location Schedule window, select the appointment whose treatment you want to
record.
2. Right-click or press F4.
3. Click Chart/Capture… or press CTRL+P to open the Treatment Chart window.
4. Click Treat to open the Record Manual Treatment dialog box.
5. Verify that the date and time shown for the treatment that you want to record are when
the treatment was delivered.
6. Click Record.
7. Capture the charges.
Manually Recording Portal Images
1. Click Portfilm… or Post Portfilm… in the Manual Treatment dialog box. The Manual
Portfilm dialog box opens.
2. Type the MU values in the MU field of the Treat Port or Open Port group.
3. Make sure that the date and time are correct.
4. Type a note in the Note field.
5. Click Record.
6. Capture the charges.
Reviewing the Treatment Chart after Treatment
When you finish treatment delivery, you can review the treatment or add additional
comments to the Note field.
1. In the Treatment Delivery Table dialog box, click Close.
2. Double-click the field you treated in the Treatment Chart window.
The Projected Rx Mismatches dialog box and Not All Fields Treated
message box may open.
3. In the Historic Treatment dialog box, change the original note you typed in the Record
Treatment dialog box.
274 Copyright 2010, Elekta Impac Software
LUGMSQ0002/4.0/23-Sep-2010