MOSAIQ User's Guide - UCSF Radiation Oncology

Adding Secondary Dose Tracking Sites
CHAPTER 5: MOSAIQ Radiation Oncology Clinical Charting
You can have MOSAIQ track dose delivered to non-prescription or secondary sites, such as
critical structures. This also enables you to make sure patients receive the exact dose that is
necessary. There are Cumulative Secondary Dose Tracking Sites and Secondary Dose
Tracking Sites.
Although you can define an unlimited number of sites, a maximum of
21 dose tracking site columns can appear at a time. This includes 21
CumRx: and Cum: dose tracking site columns. You can configure them
to show the most applicable dose tracking sites.
1. In the Diagnoses and Interventions window, click the radiation prescription, then click
Change to open the Radiation Prescriptions dialog box.
2. Click Dosimetry.
3. Double-click Add New Dose Tracking Site in the upper section of the Dosimetry Setup
window, or click in the Add New Dose Tracking Site column, then click Add.
4. In the Cumulative Secondary Dose Tracking Site dialog box, type a name for the
Cumulative Secondary Dose Tracking Site in the Site Name: field.
Cumulative Secondary Dose Tracking Sites track the dose contribution to another site,
such as a critical structure, that is accumulating from the prescription site. Secondary
Dose Tracking Sites track dose contributions to any point or volume (not prescribed)
within the field. These include off-axis points and critical structures.
5. Click OK.
6. Double-click Add New Dose Tracking Site in the lower section of the Dosimetry Setup
window, or click in the Add New Dose Tracking Site column, then click Add.
7. In the Secondary Dose Tracking Site dialog box, type a name for the Secondary Dose
Tracking Site in the Site Name: field.
8. Click OK to save the secondary dose tracking site.
Copyright 2010, Elekta Impac Software 107
LUGMSQ0002/4.0/23-Sep-2010