MOSAIQ User's Guide - UCSF Radiation Oncology
MOSAIQ User's Guide - UCSF Radiation Oncology
MOSAIQ User's Guide - UCSF Radiation Oncology
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MOSAIQ</strong> User’s <strong>Guide</strong><br />
Pre-Treatment Warnings<br />
Every time you start treatment delivery, SEQUENCER makes a series of initial checks. The<br />
following is a description of each check, in the order that SEQUENCER makes them, and the<br />
warning message that appears if the system finds a discrepancy.<br />
Field Treated Today!<br />
Continue?<br />
Fractions will be<br />
Exceeded! Continue?<br />
Field dose is<br />
undefined. Continue?<br />
Treatment field is not<br />
associated with<br />
prescription site.<br />
Continue?<br />
A dose site<br />
coefficient has either<br />
not been defined or<br />
set up so that the<br />
treatment of this field<br />
will not contribute<br />
any dose to the<br />
prescription site.<br />
Continue?<br />
Dose Will Be<br />
Exceeded by #!<br />
Override?<br />
Treatment Machine<br />
Mismatch! Override?<br />
This message appears as a warning if you are about to treat a<br />
patient field that was already treated today. Click Yes if you<br />
still want to treat the field(s)<br />
This message appears when you are about to exceed the<br />
number of fractions prescribed.<br />
This warning appears if the selected field does not have a dose<br />
value greater than zero (0) and your department is configured<br />
to receive dose check warnings. You can either cancel the<br />
approval or continue with the approval process and not change<br />
the dose value.<br />
This warning appears if the field selected is not associated with<br />
a parent Rx site and your department is configured to receive<br />
dose check warnings.<br />
This warning message appears if the field is associated with a<br />
parent Rx site, but does not have an effective dose site<br />
coefficient.<br />
This warning message appears when you are about to exceed<br />
the prescribed total dose. If you still want to treat the field,<br />
click Yes, then type your user name and password in the<br />
approval dialog box and press Enter to override the warning.<br />
Only users with override privileges can exceed the prescribed<br />
total dose.<br />
This warning message appears when you are about to treat a<br />
patient on any linac other than the one defined in the patient's<br />
Treatment Field Definition. If you still want to treat the field,<br />
click Yes, then type your user name and password in the<br />
approval dialog box and press Enter to override the warning.<br />
Only users with override privileges can treat on a linac that is<br />
not specified in the setup. If SEQUENCER still does not<br />
recognize the linac you are about to use, the message<br />
"Unknown Machine. Exiting." appears and you must exit the<br />
dialog box. You cannot treat on a linac that is not<br />
characterized. The machine mismatch check is userconfigurable<br />
at installation.<br />
282 Copyright 2010, Elekta Impac Software<br />
LUGMSQ0002/4.0/23-Sep-2010
Change language