MOSAIQ User's Guide - UCSF Radiation Oncology

CHAPTER 7: Image Management-ViewStation & Photos and Diagrams
Promote Curve Layer Annotations
For images imported into MOSAIQ with annotations, you can select and copy imported
annotations to the patient positioning curve layer for curve matching as follows:
1. Click in the Image Registration window to open the Curve Layer Selection dialog
box, as shown in Figure 40.
Figure 40: Curve Layer Selection Dialog Box
2. Click the check boxes for the annotation curves that you want to show on the reference
image.
3. Click OK to copy the selected annotation(s) to the patient positioning curve layer.
Registering Images
CAUTION
Reticle scale images before attempting to register them. Image
registration requires an isocenter on both images to calculate
offsets, regardless of the registration method. Refer to Reticle
Scaling Reference Images on page 153 and Reticle Scaling
Verification Images on page 156.
The Image Registration process has the following requirements:
Your linac must be properly characterized, including SAD and couch sections.
You must specify a Patient Orientation.
You must specify the couch and gantry positions for the treatment and setup fields in
the Treatment Field Definition.
1. Open the patient chart, then click Tools | Image Work List to open the Image Work
List dialog box.
2. In the Image Work List, set the search criteria to show a list of all images requiring
review.
Refer to Checking the Image Work List for Images Requiring Reviews on page 182.
3. Click the image pair you wish to register, then click Review to open the images in the
Image Review window.
Copyright 2010, Elekta Impac Software 197
LUGMSQ0002/4.0/23-Sep-2010