MOSAIQ User's Guide - UCSF Radiation Oncology

DICOM Configuration Admin Rights
CAUTION
CHAPTER 9: MOSAIQ Oncology PACS
In order to modify DICOM Devices in MOSAIQ, you must have Image
Maintenance DICOM Configuration Admin security rights.
1. Open the Security dialog box, then select the Image tab to open it.
2. Click Maintenance | DICOM Configuration: | Admin.
3. Click the OK button.
Department Level Configuration
You can click Archived Objects to query the MOSAIQ Oncology PACS database from
MOSAIQ. Once the query returns results you can send one or more series to a Send
Destination. Follow the steps below to fill in the list of Send Destinations. Refer to New
DICOM Devices as Data Receivers in this section for more details. This list of devices should
include MOSAIQ, and other devices that can receive and store DICOM objects, such as
Treatment Planning Systems.
Adding New DICOM Devices as Data Receivers
You must have Image | Maintenance | DICOM Configuration: |
Admin rights to change DICOM Maintenance.
1. Click File | Import/Export | DICOM Configuration | DICOM Maintenance… to open
the DICOM AE Configuration dialog box.
The DICOM AE Configuration dialog box will already contain a list
of configured devices, completed as part of the MOSAIQ and
MOSAIQ Oncology PACS configuration.
2. Click the Add button to open the DICOM AE Edit dialog box and type DICOM
connectivity information for your new DICOM source.
3. Type a descriptive name as the Device Name, such as Nomos Corvus Server. The Host
Name can be either the host name or the IP address of the DICOM source. Type the AE
Title and the Scanning Port as specified by the device vendor. Select the Device Active
box to enable the device.
The Device Active check box lets you disable a device and retain
the configuration.
4. Click the Verification and Storage check boxes in the SCP group. Do not select any
options in the SCU group.
Copyright 2010, Elekta Impac Software 237
LUGMSQ0002/4.0/23-Sep-2010