MOSAIQ User's Guide - UCSF Radiation Oncology

CHAPTER 5: MOSAIQ Radiation Oncology Clinical Charting
7. If you receive the error message box for total dose calculation, click OK, then do step 5
or 6 again to correct the total prescribed dose or fractional dose.
8. Click OK in the Radiation prescription dialog box. The applicable staff member must reapprove
the prescription after you change the dose.
CAUTION
RTP Import
Do the same steps when you change the fractional dose in the
radiation prescription. Make sure that you receive a whole number
for the number of fractions when you divide the fractional dose by
the total prescribed dose.
When you change the fractional dose, change the dose in the
Treatment Field Definition dialog box for all of the treatment fields
associated with the radiation prescription.
RTPConnect lets you import treatment plans. DCM translates DICOM data into
RTPConnect format, which you can import into MOSAIQ.
Importing Treatment Plans
CAUTION
Editing Import Data
To use RTP Import, you must have Clinical | Dosimetry General |
Modify and Clinical | Action Points | Approve security rights.
If there is file data that conflicts with the patient’s data in the system, the conflicting data
displays as errors in the Import Treatment Plan window. You cannot import the RTP file
until you correct the errors. You can, however, edit the file data in the Import Treatment
Plan window to correct errors or change the action before importing the file. In this exercise,
you will review editing options for RTP file data and make the changes necessary to import
the RTP file in the next exercise.
1. Click File | Import/Export | RTP Import... to open the RTP Import window.
If the new import path does not appear in the Look in: field, click , then select the
path.
Before importing files via RTP Import, the RTP import area must be
setup. If there are no RTP import areas when you click in the Look
in: field, contact your system administrator.
Copyright 2010, Elekta Impac Software 79
LUGMSQ0002/4.0/23-Sep-2010