MOSAIQ User's Guide - UCSF Radiation Oncology

Selecting Images
b. Click the Refresh button to update the table.
CHAPTER 9: MOSAIQ Oncology PACS
The table shows the images if the number is less than the threshold value. If it is more, a
message tells you to make a decision. If it is necessary to truncate the display, accept the
message to truncate the display to the query threshold.
MOSAIQ truncates the display, but images of a specified patient
are always kept together to prevent a division of the images.
1. Click the Restore Images tab.
2. Do one of the steps that follow.
OR
Click one image.
Click the first applicable image, then press CTRL + click other images to select
multiple, non-sequential images.
Click an image, then press CTRL + A to select all images in the table.
In the Display Options field, click the Select All check box to select all images
in the table.
The table shows the selected images, which are highlighted in a light-blue color.
3. Click the Refresh button to clear all selected images in the table, or clear the Select All
check box.
Putting Images into the Restore Queue
To select images again, refer to step 2 above.
1. Click the Restore Images tab.
2. Click one or more images to restore.
3. Click the Restore button, found in the top right corner of the pane, then wait for a few
minutes.
MOSAIQ puts the images in the restore queue and starts processing the images.
2. Click the Close button, found in the top right corner of the pane, to close the Restore
Utility Window, if desired.
If you close the window too early, then MOSAIQ displays a message
that tells you to make a decision. Click the Yes button to stop the
queuing. Otherwise, click the No button to keep the window open
and continue the queuing.
Copyright 2010, Elekta Impac Software 249
LUGMSQ0002/4.0/23-Sep-2010