MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User’s Guide
If the MU differs, the MU Information message box opens, shown in Figure 21.
Figure 21: MU Information Message Box
This indicates the MU on the treatment machine does not match the MU for the
treatment field definition in MOSAIQ.
7. If the MU Information message box displays, click OK.
Note that the MU in the treatment field did not change. If the MU value on the linear
accelerator is the correct value, you must manually change the MU in the treatment field
definition.
8. Click OK to save parameters to the treatment field definition or click Cancel to keep the
original parameter settings.
Changing a Treatment Field
You may need to change a treatment field definition if, for example, some element of the
linear accelerator characterization changes or if the patient treatment plan changes.
CAUTION
To change a treatment field, you must have Clinical | Field Defs |
Modify rights.
1. In the Diagnoses and Interventions window, double-click the treatment field to change.
2. In the Treatment Field Definition dialog box, change the treatment field.
CAUTION
Any changes you make to the treatment field definition apply when
you treat the patient. Elekta/Impac recommends that you review any
changes to make sure they are correct BEFORE treatment.
3. Click OK to save your changes.
98 Copyright 2010, Elekta Impac Software
LUGMSQ0002/4.0/23-Sep-2010