MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User’s Guide
Approving Multiple Radiation Prescriptions
You can also approve multiple radiation prescriptions at the same time.
1. In the Radiation Prescriptions dialog box, tag the radiation prescriptions by clicking each
in the upper pane next to the left margin.
A “»” appears adjacent to the radiation prescriptions. This indicates that they are
tagged/selected.
2. Click Status to open the Record Status dialog box.
3. In the New Status section, select Approved, type your Password, then click OK to
approve the radiation prescriptions.
Copying Radiation Prescriptions from Another Patient
You can use the Radiation Prescription Copy option to quickly and efficiently enter data for
patients, whose prescriptions are nearly identical; thus providing a faster way to enter a set of
prescription sites. If one patient has a radiation prescription that is essentially similar to one
you could create for another patient, you can copy that first radiation prescription of the
patient.
1. In the Radiation Prescriptions dialog box, right-click anywhere or press F4 to open the
Radiation Prescriptions Options menu.
2. Click Copy Rxs from Another Patient… to open the Select Patient window.
3. Double-click the patient with the radiation prescription(s) to copy.
Changing Prescribed Doses
You can change the total prescribed dose and the fractional dose or any dose in an approved
or any prescription. Elekta/Impac recommends that an applicable staff member reapprove the
prescription after any changes to create a historical record of the change.
1. Open the chart for your patient.
2. Open the Diagnoses and Interventions window. The Radiation tab should appear by
default.
3. Double-click a prescription.
4. Click the prescription site in the table in the top section of the Radiation Prescriptions
dialog box, then click Change.
5. To change the total prescribed dose, double-click in the Rx Dose field of the
fractionation phase for the remaining dose, type the new total prescribed dose, then press
TAB.
6. To change the fractional dose, double-click in the Fractional Dose field of the
fractionation phase for the remaining dose, type the new fractional dose, then press TAB.
78 Copyright 2010, Elekta Impac Software
LUGMSQ0002/4.0/23-Sep-2010