MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User’s Guide
8. Do all of the steps in the table that follows to set up the AE title, hostname, and port
number of the DICOM device.
Do this… To set the DICOM device…
In the AE Title: field, type the AE
title in the text box
In the Host Name: field, type the
hostname in the text box
In the Port Number: field, type
the port number in the text box
destination Application Entity (AE) title (for example,
the AE Title for MOSAIQ Oncology PACS is
MOP_SCP).
hostname or IP address (for example, for MOSAIQ
Oncology PACS).
port number.
For example, type 4000 for the MOSAIQ Oncology
PACS port number.
9. In the Auto Forward IODs field, click one or more Auto Forward IOD check boxes to
select a type of DICOM data or a DICOM data set for auto-forwarding. By default,
none of the Auto Forward IOD check boxes are selected.
Do one or more steps in the table that follows.
Do this… To select…
Click an Auto Forward IODs
check box
Note: Click an Auto Forward
IODs check box again to clear
it.
Click each non-adjacent Auto
Forward IODs check box
Note: Click any Auto Forward
IODs check boxes again to
clear it/them.
one type of DICOM data (for example, you can autoforward
a standard CT image to MOSAIQ Oncology
PACS).
Example:
226 Copyright 2010, Elekta Impac Software
LUGMSQ0002/4.0/23-Sep-2010
OR
a DICOM data set.
Example: