MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User’s Guide
4. In the Import IODs field, found below the Enable Import check box, select either one
type of DICOM data or a set for DICOM importing. Do one or more of the steps in the
table that follows.
Do this… To clear or select…
Click an Import IODs check box
Note: Click a check box again to
select or clear it.
Click each Import IODs check box
that is not adjacent to another
check box
Note: Click a check box again to
select or clear it.
a. Click the first DICOM data
name.
b. Press SHIFT + click the last
DICOM data name.
c. Click one of the Import IODs
check boxes in the selected
range.
Note: While the range of check
boxes is selected, click (again) only
one Import IODs check box in the
range to select or clear the entire
DICOM data (IOD) set.
one type of DICOM data.
224 Copyright 2010, Elekta Impac Software
LUGMSQ0002/4.0/23-Sep-2010
OR
a set of DICOM data.
OR
a set of DICOM data.
5. At the bottom of the System Preferences window, click the OK button to set up DCM to
automatically DICOM import the selected type of DICOM data or DICOM data set.