MOSAIQ User's Guide - UCSF Radiation Oncology

Approving a Treatment Field
CHAPTER 5: MOSAIQ Radiation Oncology Clinical Charting
Once you add and change a treatment field, approve the treatment field before you treat the
patient. In fact, depending on how you have configured MOSAIQ, you may not be able to
treat the patient using an unapproved field. Once you have approved a field, you cannot
remove it, though you can make changes to the field. If you change an approved field, the
status of the field automatically changes to Unapproved.
CAUTION
WARNING
To approve a treatment field, you must have Clinical | Field Defs |
Approve rights.
Always review all data before you approve a treatment field.
1. In the Diagnoses and Interventions window, double-click the treatment field to approve.
2. In the Treatment Field Definition dialog box, right-click in the dialog box or press F4 to
open the Options menu.
3. Click Approve… to open the Approve Treatment Field Definition dialog box.
4. Type your password in the Password field, then click OK to approve the treatment field.
5. In the Treatment Field Definition dialog box, click OK to save the change to the
treatment field.
Viewing the Field Delta View
The Field Delta window lets you view recent changes to a treatment field.
1. Double-click the treatment field in the Diagnoses and Interventions window.
2. Right-click or press F4 in the Treatment Field Definition dialog box.
3. Select Field Delta. The Field Delta View window opens in read only mode, shown in
Figure 22.
Copyright 2010, Elekta Impac Software 99
LUGMSQ0002/4.0/23-Sep-2010