MOSAIQ User's Guide - UCSF Radiation Oncology

Documenting VAD Details
CHAPTER 4: MOSAIQ Medical Oncology Clinical Charting
If your patient has a vascular access device (VAD), you can document medication
administration with the VAD/Bld Prod tab.
1. Click , select the remaining order(s) to treat, then click the OK button to open the
MAR dialog box.
If you have only one medication order left to document, the MAR dialog box opens
automatically.
2. Document the dose and time for the medication.
3. Click VAD/Bld Prod to show the VAD/Bld Prod tab of the MAR dialog box.
Use the VAD/Bld Prod tab to document the type of vascular access device and the flush
used. You can also use it to add default comments and longer notes. If the patient got a
blood transfusion, you can record the information about the transfusion in the Blood
Products group.
4. Click adjacent to the Type field, then click the type of VAD.
5. Click adjacent to the Flush field, then click the VAD flush.
6. Click adjacent to the Comment field, then click a standard comment.
You can select a default comment or click the Note button to add a longer note.
Your administrator can change the Type, Flush, and Comment lists.
7. Click the Non-Coring check box.
8. Click the Note button to open the MAR Note dialog box.
9. Type the Subject of the note, then press TAB.
10 Type the content of the note, then click the OK button to close the MAR Note window.
A green checkmark appears by the Note button in the MAR dialog box.
11. Click the OK button to record the medication administration.
Copyright 2010, Elekta Impac Software 69
LUGMSQ0002/4.0/23-Sep-2010