MOSAIQ User's Guide - UCSF Radiation Oncology

CHAPTER 10: SEQUENCER
7. Click Record in the Record Treatment dialog box or Record Port dialog box (or
Composite Record Treatment dialog box).
8. Select the next field and mode up the linac.
9. Change the patient position if necessary.
10. Treat the next field and make portal images if necessary.
11. Repeat steps 2-10 until you treat all fields or must end the session.
12. Capture charges.
Portal Images
You can schedule and change portal images for a patient treatment on the Treatment
Calendar. You can schedule portal images before, during, or after treating the field.
SEQUENCER verifies and records portal images before, during, and after treatment. You
can also restore treated fields to record a post-portal image.
Pre and Post Treatment Portal Images
You can specify a portal image before, during, or after a treatment.
1. Click Pre Portfilm… from the options menu of the Treatment Delivery Table to make a
portal image before treatment.
Click Post Portfilm… to make a portal image after treatment.
2. Select the Plan or Open radio button in the Select Port dialog box (typically you select
Plan first, unless you only want an open field image).
3. Click OK. The Verified Port dialog box opens.
4. Correct any out of tolerance parameters and click Record.
5. Select the Open radio button in the Select Port dialog box. The Verified Port dialog box
opens.
6. Correct any out of tolerance parameters and click Record. The Record Port dialog box
opens.
7. You can type a note in the Note field if necessary, then click Record.
8. Capture the charges.
Portal Image During Treatment
Click Port During Only… from the options menu of the Treatment Delivery Table to make
a portal image during the treatment.
Portal Image Only
Click Portfilm Only… from the options menu of the Treatment Delivery Table to make a
portal image, but not treat the field.
Copyright 2010, Elekta Impac Software 259
LUGMSQ0002/4.0/23-Sep-2010