MOSAIQ User's Guide - UCSF Radiation Oncology

MOSAIQ User’s Guide
Reviewing/Approving Images from the Image Work List
1. Click Tools | Image Work List to open the Image Work List dialog box.
2. Use the search filters to generate the list of patient images you need to review.
Refer to Checking the Image Work List for Images Requiring Reviews on page 182.
3. In the Image Work List dialog box, click the patient name listed in the table to the right
of the Criteria group.
This shows the images for the selected patient in the image information table at the
bottom of the dialog box.
4. In the lower section of the Image Work List dialog box, click the image you wish to
review, then click Review to open the image(s) in the Image Review window.
If you are reviewing an image pair, click the verification image,
then click OK.
5. Click the viewer of the image you are reviewing to activate the viewer.
In the Image Review window, you must click the image in the viewer
to activate it before you can annotate or enhance the image.
6. If you wish to show the treatment geometry on the image, click the Geometry check
box in the View section of the window.
7. If you wish to show a graticule on the image, right-click, point to Preferences, then
click View Graticule.
8. On the Changes tab, click the Field check box under Requested to request a field
change.
9. If you wish to request a block change, click the Block check box under Requested.
10. If you wish to specify that a new image must be taken after completing the change
request, click the Re-image check box under Requested.
11. If you wish to specify a change other than a field, block, or re-image change, click the
Other check box under Requested.
12. Click , then type your review comment for the Other change request on the image.
CAUTION
We do not recommend typing important information about
change requests in the Comment field because if someone deletes
the information, it is no longer part of the clinical record.
The Comment field is designed for informal notes. You cannot lock
the notes entered in this field.
184 Copyright 2010, Elekta Impac Software
LUGMSQ0002/4.0/23-Sep-2010