MOSAIQ User's Guide - UCSF Radiation Oncology

DCM System Preferences
CHAPTER 8: MOSAIQ DICOM
The System Preferences window is a graphical user interface for configuring DCM. It has five
tabs: General, Scan, Import Areas, Auto Forward, and Password. Changing tabs does not
save or cancel any changes on another tab. If you click the Cancel button to close the
System Preferences window with pending changes, a message box opens. It asks you to make
sure that you want to exit the window without saving the changes.
Logging on to the System Preferences Window
The System Preferences window is password-protected. The purpose is to limit access to only
those users with the privilege to change the DCM configuration. If a new password is not
configured, type CAPMI to open the System Preferences window. After a new password is
configured and confirmed on the Password tab, the import scanning configuration options
are enabled.
1. From the File menu, click File | Utilities | System Preferences to open the Login
dialog box.
2. In the Password field, type your DCM administrative password in the text box, then
click the OK button. If you do not know your password, contact your system
administrator.
MOSAIQ opens the System Preferences window.
Setting Up DICOM Import with DCM
1. Open DCM.
For more information, refer to the procedure—Logging on
to the System Preferences —on page 223.
2. In the System Preferences window, click the Import tab to open it.
3. At the top of the System Preferences window, click the Enable Import check box to
make the Import IODs field available.
By default, all of the Import IODs check boxes are selected.
Copyright 2010, Elekta Impac Software 223
LUGMSQ0002/4.0/23-Sep-2010