MOSAIQ User's Guide - UCSF Radiation Oncology

Adding Prior Dose
CHAPTER 5: MOSAIQ Radiation Oncology Clinical Charting
If you know the quantity of dose administered to a site before you record the site in
MOSAIQ, you can record the prior dose in the Dosimetry Setup window. Prior dose may be,
for example, from a patient treatment at another facility.
1. In the Dosimetry Setup window, double-click the Prior: column header for any of the
primary or secondary dose tracking site columns. This includes Cumulative Primary and
Cumulative Secondary dose tracking site columns.
The Cumulative Secondary Dose Tracking Site window appears.
2. In the dialog box for the selected dose tracking site, type the dose delivered to this site
outside of the department EMR in the Prior Dose field.
3. In the Cumulative Secondary Dose Tracking Site window, Click Note.
4. Enter a note regarding the prior dose if needed, then click OK.
5. Click OK.
Defining Total Cumulative Dose and Dose Tracking Sites
Once you have assigned the course/Care Plan and created the radiation prescription(s), you
can use the Dosimetry feature to create dose tracking sites from treatment field and radiation
prescription information.
1. In the Radiation Prescriptions dialog box, click Change.
2. Enter the total dose for the prescription site, including the dose being administered to
this site from other prescriptions in the Total Cum field under Dose Limits section.
3. Click OK.
4. Click Dosimetry.
5. In the Dosimetry Setup Information window, click OK.
6. In the Dosimetry Setup window, double-click each row of the CumRx: column to add
the dose coefficient.
7. In the Radiation Prescriptions dialog box, click Change and enter the total dose for the
prescription site, including the dose being administered to this site from other
prescriptions.
Copyright 2010, Elekta Impac Software 109
LUGMSQ0002/4.0/23-Sep-2010