MOSAIQ User's Guide - UCSF Radiation Oncology

DICOM AE Edit
CHAPTER 8: MOSAIQ DICOM
The DICOM AE Edit dialog box lets you configure an Application Entity (AE). An AE is
necessary to use the DICOM Print feature, the Varian 4D interface, and MOSAIQ Oncology
PACS. The Merge application must also be installed and properly configured. Please contact
ELEKTA/Impac if you have problems with DICOM AE configuration, or if the Merge
application is not properly installed and configured.
1. In the MOSAIQ application, click File | Import/Export | DICOM Configuration |
DICOM Maintenance....
2. Click the Add button, or select an AE, then click the Change button.
3. Type the Device Name, Host Name, AE Title, and Scanning Port number, then select the
appropriate check boxes in the SCU and SCP groups.
Please contact ELEKTA/Impac if you do not know which port to use, or
if you need any other assistance.
The Device Active check box applies to only DICOM Print and Varian
4D Console support. It does not apply to MOSAIQ Oncology PACS.
For MOSAIQ Oncology PACS, the Device Name must be MOSAIQ
Oncology PACS, the AE Title must be MOP_SCP and the Scanning Port
must be 4000.
Setting up DICOM Print Options
The Merge application must be installed before you can configure a DICOM printer.
CAUTION
You must have Image | Maintenance | DICOM Configuration: | Modify
security rights to configure a DICOM printer. Please contact
ELEKTA/Impac for assistance.
1. Open the DICOM AE Configuration dialog box.
2. Click the Add button to create a new AE, or select one then click the Change button.
3. Type the Device Name, Host Name, AE Title, and Scanning Port number the DICOM
AE Edit dialog box.
4. Select the Print box in the SCP Group, then click the Print Formats button.
Copyright 2010, Elekta Impac Software 231
LUGMSQ0002/4.0/23-Sep-2010