MOSAIQ User's Guide - UCSF Radiation Oncology

Using the Diagnosis and Staging Tabs
CHAPTER 3: General Clinical Charting
Along with T, N, M staging, use the Diagnosis and Staging tabs to add Diagnosis Specific
Values, tumor measurements. You can also use it to add information about patient diagnosis,
additional classifiers (if applicable), and collaborative staging.
Adding Diagnosis Specific Values
DSVs or Diagnosis Specific Values are tumor markers or other test results that apply to the
initial diagnosis of cancer. The Diagnosis Specific Values list shows the test results for tumor
markers that can apply to the diagnosis. You can use the default tumor markers. You can
also add or change tumor markers or DSVs.
1. In the Staging tab of the Diagnosis and Staging window, click Add Value to open the
Add Diagnosis Specific Value dialog box.
The Add Diagnosis Specific Value dialog box lets you add or change the DSVs or tumor
marker results. The Date and time default to the current date and time, but you can
change them. If the patient has test results, they appear in the Previous Values group
when you select the tumor marker.
2. Click the Value cell for a tumor marker, then type in the lab result value.
3. Type the lab result value in the Value cell for a tumor marker, then click a different row
(but do not enter a value).
If you add a value not in the normal reference range of the tumor marker, the tumor
marker is selected in red. This shows a warning condition.
4. Click OK to save the results.
Red highlighting also appears in the Diagnosis Specific Values list of the Diagnosis and
Staging window.
5. Click Flowsheet to open the Laboratory tab of the Flowsheet window.
6. Change the View to Tumor Markers.
7. Right-click, then click Detail View.
8. Double-click the column containing the tumor marker results to open the Flowsheet
window in Entry/Edit mode. You can also click Add to add a new set of tumor marker
results.
9. Click the tumor marker in the Date/Time column, then type the lab results in the text
field.
10. Click OK, then click Cancel to close the Flowsheet window.
Copyright 2010, Elekta Impac Software 31
LUGMSQ0002/4.0/23-Sep-2010