MOSAIQ User's Guide - UCSF Radiation Oncology

CHAPTER 7: Image Management-ViewStation & Photos and Diagrams
8. If you wish to associate the image with a prescription site, click Site, click in the drop
list that appears, then click the prescription site you wish to associate with the image.
9. Click OK twice to associate the image with the selected treatment field or prescription
site, then close the Image Information and Image windows.
Checking the Import Log and Import Status
Images normally are imported with no problems. However, if you have a question about
whether an image was imported properly or was assigned to the wrong patient, you can
check the Import Log and the Namer Status dialog box.
1. Click File | System Utilities | Image Maintenance | Review Import Log… to open
the Import Log window.
The Import Log window shows the imported images, with the most recent image at the
top of the list. The list shows the date and time an image was imported, the patient with
which it was associated, and optionally the field or location.
2. Click Close to close the Import Log window.
3. Click File | System Utilities | Image Maintenance | Namer Status… to open the
Namer Status dialog box.
The Namer Status window enables you to check the status of the Namer application in
any department from MOSAIQ without having to go to the Namer workstation.
Descriptions of the statuses are as follows:
Database
Access
Appears green if the database specification is valid (path exists and
known database files exist) and red if the database specification is
invalid (path and known database files do not exist).
Staging Areas Appears green if all accessible staging areas are available, yellow if
at least one accessible staging area is available, and red if none of
the accessible staging areas are available.
Storage
Locations
Appears green if all accessible storage locations are available,
yellow if at least one accessible storage location is available, and
red if none of the accessible storage locations are available.
Copyright 2010, Elekta Impac Software 147
LUGMSQ0002/4.0/23-Sep-2010