1975 Datsun 280z FSM - Spooled up Racing

Automatic Transmission
Tightening torque:
0.25 to 0.35 kg-m
(1.9to2.5ft-lb)
Note: Install check valve and relief
spring so that they are properly
positioned in valve body.
ST25160000
HT61000800
AT173
Fig. AT-107 Installing side plate
3. Install orifice check valve, valve
spring, throttle relief valve spring and
steel ball in valve body.
4. Install upper and lower valves.
See Figure AT-108.
Tightening torque:
0.25 to 0.35 kg-m
(1.8 to 2.5 ft-lb)
Reamer bolt tightening torque:
0.5 to 0.7 kg-m
(3.6 to 5.1 ft-lb)
HT61000800
AT 174
Fig. AT-108 Installing valve body
5. Install oil strainer.
Tightening torque:
0.25 to 0.35 kg-m
(1.8 to 2.5 ft-lb)
AT-47