PowerFlex 750-Series AC Drives User Manual

3-46 Programming and ParametersFileGroupNo.NameDescriptionValuesRead-WriteData Type325 Auto MaskAutomatic MaskEnables/disables ports to control the logic command (such as start and direction), while in Auto mode.OptionsReservedPort 14Port 13ReservedReservedReservedReservedReservedReservedPort 6Port 5Port 4Port 3Port 2Port 1Digital InDefault 0 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Condition False1 = Condition True326 Manual Cmd MaskManual Command MaskEnables/disables ports to control the logic command (such as start and direction), while in Manual Mode.OptionsReservedPort 14Port 13ReservedReservedReservedReservedReservedReservedPort 6Port 5Port 4Port 3Port 2Port 1Digital InDefault 0 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Condition False1 = Condition True327 Manual Ref MaskManual Reference MaskEnables/disables ports to control the speed reference while in Manual Mode. When a port is commanding manual mode, the reference is forced tothe commanding port (or alternate source selected by P328 [Alt Man Ref Sel]), if the respective bit in this parameter is set.DRIVE CFGAuto Manual CtrlOptionsReservedPort 14Port 13ReservedReservedReservedReservedReservedReservedPort 6Port 5Port 4Port 3Port 2Port 1Digital InDefault 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Condition False1 = Condition True328 Alt Man Ref SelAlternate Manual Reference SelectProvides a way to select a speed reference source when in manual mode, that isdifferent than the port which is actuating the manual request. Specifies the port tobe used for the reference. The default setting (0) results in the actuating portbeing the one that is used for the manual reference.329 Alt Man Ref AnHiAlternate Manual Reference Analog HighHi scale for the alternate manual speed reference when P328 [Alt Man Ref Sel] isconnected to an Analog Input.330 Alt Man Ref AnLoAlternate Manual Reference Analog LowLo scale for the alternate manual speed reference when P328 [Alt Man Ref Sel] isconnected to an Analog Input.Default: 0Min/Max: 0 / 159999Units:Default:Min/Max:Units:Default:Min/Max:HzRPMP520P521 / P520HzRPM0P521 / P520331 Manual PreloadManual PreloadEnables/disables automatic preloading of the “Auto” speed reference into a HIM when the HIM has been granted Manual control.RW 32-bitIntegerRW RealRW RealOptionsReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedPort 3Port 2Port 1ReservedDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Condition False1 = Condition TruePowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009